> Hello,
> I was wondering if anyone might point me in the right direction,
>
> I am having problems with a HP-7100e parallel CD Writer
> I have downloaded cdrecord-1.9 ran the make
> then tried the rc.pp
> which is a script file supplied with cdrecord-1.9
>
> 'start')
> echo "Starting Parallel Port IDE/ATAPI"
> modprobe paride
> modprobe "$adapter"
> # modprobe pg
> # modprobe pg verbose=2 drive0=0x378,0,0,-1,-1,0
> modprobe pg verbose=0 drive0=0x378,0,0,-1,-1,0
> ;;
>
> 'stop')
> echo "Stopping Parallel Port IDE/ATAPI"
> rmmod pg
> rmmod "$adapter"
> rmmod paride
> ;;
>
> *)
> echo "Usage: rc.pp start|stop"
> esac
> exit
>
> RESULTS-------------------------------------------------------------
> [root@trematode /cdrecord-1.9]# rc.pp start
> Starting Parallel Port IDE/ATAPI
> /lib/modules/2.2.14-5.0/misc/pg.o: init_module: Device or
> resource busy
> /lib/modules/2.2.14-5.0/misc/pg.o: insmod
> /lib/modules/2.2.14-5.0/misc/pg.o failed
> /lib/modules/2.2.14-5.0/misc/pg.o: insmod pg failed
> DMESG---------------------------------------------------------
> ----------------------
> paride: version 1.04 installed
> paride: friq registered as protocol 0
> pg: pg version 1.02, major 97
> parport0: PC-style at 0x378 [SPP,PS2,EPP]
> parport0: no IEEE-1284 device present.
> pg0: Adapter not found
> pg: No ATAPI device detected
> --------------------------------------------------------------
> --------------------------
> My parallel port is running in EPP mode
> Any suggestions?
> Regards,
> Greg.
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Aug 31 2000 - 12:18:07 EDT