Re: [PARPORT] SSQ2030 scanner and onscsi module

From: James T. Nelson III (jtnelson@home.com)
Date: Wed Nov 15 2000 - 00:53:48 EST

  • Next message: John O'Connor: "Re: [PARPORT] Failure to negotiate an ecp mode"

    Anyone have an answer for this question? I'm trying to get an SQ3036 to
    work and having similar results. I know that the scanner can work
    because I've had it working before, but I've upgraded Mandrake 3 times
    since then.

    Also, anyone have any idea why it didn't show up in the list archives on
    torque.net?

    TIA

    Jim

    Mark wrote:
    >
    > I've downloaded the patches to get the OnScsi support working , and applied
    > them to the 2.2.17 kernel.
    >
    > ppscsi loads OK, but onscsi fails the tests. What are the tests the module is
    > running,and what can I look for to see what's failing or that I can change...
    >
    > [root@tbone SANE]# insmod ppscsi
    > [root@tbone SANE]# insmod onscsi verbose=4 host0=0x278
    > /lib/modules/2.2.17/scsi/onscsi.o: init_module: Device or resource busy
    > [root@tbone SANE]# tail -12 /var/log/messages
    > Nov 3 08:22:53 tbone kernel: ppSCSI 0.91 (0.91) installed
    > Nov 3 08:22:59 tbone kernel: onscsi.0: signature 0x357
    > Nov 3 08:22:59 tbone kernel: onscsi.0: port 0x278 mode 0 test failed (1,-1,0)
    > Nov 3 08:22:59 tbone kernel: onscsi.0: signature 0x357
    > Nov 3 08:22:59 tbone kernel: onscsi.0: port 0x278 mode 1 test failed (1,-1,0)
    > Nov 3 08:22:59 tbone kernel: onscsi.0: signature 0x357
    > Nov 3 08:22:59 tbone kernel: onscsi.0: port 0x278 mode 2 test failed (1,-1,0)
    > Nov 3 08:22:59 tbone kernel: onscsi.0: signature 0x357
    > Nov 3 08:22:59 tbone kernel: onscsi.0: port 0x278 mode 3 test failed (1,-1,0)
    > Nov 3 08:22:59 tbone kernel: onscsi.0: signature 0x357
    > Nov 3 08:22:59 tbone kernel: onscsi.0: port 0x278 mode 4 test failed (1,-1,0)
    > Nov 3 08:22:59 tbone kernel: scsi : 1 host.
    > [root@tbone SANE]# cd /proc/parport/0
    > [root@tbone 0]# pwd
    > /proc/parport/0
    > [root@tbone 0]# ls
    > autoprobe devices hardware irq
    > [root@tbone 0]# cat autoprobe
    > [root@tbone 0]# cat devices
    > [root@tbone 0]# cat hardware
    > base: 0x278
    > irq: 5
    > dma: none
    > modes: SPP,ECP,ECPEPP,ECPPS2
    > [root@tbone 0]# cat irq
    > 5
    > [root@tbone 0]#
    >
    > --
    > _________________
    > Mark Neill
    > WebMaster
    > ThisIsMyOwn.Com
    >
    > -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    > -- with the single word "unsubscribe" in the body of the message. --

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Wed Nov 15 2000 - 00:56:09 EST