Re: [PARPORT] IO errors

From: Stefan Riha (s.riha@gmx.at)
Date: Wed Apr 10 2002 - 04:33:09 EDT

  • Next message: Luke Cliff: "[PARPORT] OFF the subject, but on my own...."

    I haven't get any answear from the list, doas someone knows wher i could
    ask this Questions?

    > I want to use my Freecom portable CD-RW writer (2x2x24) under Linux.
    > The writer is with a Freecom parallel port cable connected to my computer.
    > For testing i have connected the writer on a 486 computer.
    > Now i have installed RedHat 6.2 and when i want to mount a data CD i get
    > the
    > following errors.
    > Now i have Installed Suse 7.2 and i get the same errors when i want to
    > mount
    > the data CD.
    >
    > Now an concrete description of what i have done under RedHat 6.2
    >
    > #lsmod
    > Module Size Used by
    > lockd 31912 1 (autoclean)
    > sunrpc 53604 1 (autoclean) [locked]
    > rtl8139 12132 1 (autoclean)
    >
    > #modprobe paride
    > paride: version 1.04 installed
    >
    > #modprobe friq
    > paride: friq registered as protocol 0
    >
    > #modprobe pcd
    > pcd: pcd version 1.07, major 46, nice 0
    > pcd0: Sharing parport0 at 0x378
    > pcd0: friq 1.01, Freecom IQ ASCI-2 adapter at 0x378, mode 4 (EPP-32),
    > delay
    > 1
    > pcd0: Master R/RW 2x2x24
    >
    > #lsmod
    > Module Size Used by
    > parport_probe 3272 0 (autoclean)
    > parport_pc 7400 1 (autoclean)
    > pcd 11556 0 (unused)
    > friq 8544 1
    > paride 3532 1 [pcd friq]
    > parport 7516 1 [parport_probe parport_pc paride]
    > lockd 31912 1 (autoclean)
    > sunrpc 53604 1 (autoclean) [lockd]
    > rtl8139 12132 1 (autoclean)
    >
    > Als nächstes wollte ich eine Daten CD mounten:
    >
    > #mount /dev/pcd0 /mnt/cdrom
    > pcd0: WARNING: ATAPI phase errors
    > pcd0: Stuck DRQ
    > pcd0: lock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
    > phase=2
    > pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
    > loop=160001
    > phase=2
    > pcd0: read block before command: alt=0x58 stat=0x58 err=0x100 loop=160001
    > phase=2
    > end_request: I/O error, dev 2e:00 (PCD), sector 2
    > /dev/pcd0: Eingabe-/Ausgabefehler
    > pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
    > phase=2
    > pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
    > loop=160001
    > phase=2
    > mount: blockorientiertes Gerät /dev/pcd0 ist schreibgeschützt, es wird im
    > Nur-Lese-Modus gemountet
    > pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
    > loop=160001
    > phase=2
    > pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
    > phase=2
    > pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
    > loop=160001
    > phase=2
    > pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
    > loop=160001
    > phase=2
    > pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
    > phase=2
    > pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
    > loop=160001
    > phase=2
    > mount: Kein Medium gefunden
    >
    > I hope you can help me.
    >
    > MFG
    > Stefan Riha
    >
    > --
    > Stefan Riha
    > s.riha@gmx.at
    >
    > GMX - Die Kommunikationsplattform im Internet.
    > http://www.gmx.net
    >
    >
    > -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    > -- with the single word "unsubscribe" in the body of the message. --
    >

    MFG
    Stefan Riha 

    -- 
Stefan Riha
s.riha@gmx.at

    GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net

    --  To unsubscribe, send mail to: linux-parport-request@torque.net --
--  with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Wed Apr 10 2002 - 04:38:13 EDT